On the workbench

[Madcaravanner]

Progress so far

Traverser now has a fixed cabin with control bench and some levers

I have constructed from card a Stock yard of Railway Clearing House post 1929 Steel wagon chassis so far there are 2 @12 foot and 3@ 10 foot plus a Bogie Well Wagon with a few lengths of girder and some large wood baulks to stand the wagon frames on

here's a fake up diorama style picture for effect

[Madcaravanner]

OK not getting into the mancave much as SWMBO is insistent about me doing joinery at a 1-1 scale in the kitchen putting together the bits for her to put together a new kitchen

but when I get chance as well as doing more to the Wagon Works which is now getting the name - Jacksons Wagon Works
As the family of the Jacksons used to own Clay Cross Company and the Ashover Light Railway so I thought it would look good especially as the only PO wagons I have are Clay Cross Company ones

there are 100 OO gauge figures to paint up to look a little more realistic

I have completed a conversion of an LNER Bogie Bolster into a Crane runner to go with the 75T Hornby Breakdown train

Also my Station-masters house is progressing and now has a rambling rose and window boxes - I was hoping that there would be some children in that 100 figures I got from Ebay but alas no

and I have just acquired a proper Milk Tanker for the Branch line Milk train which is waiting for photographing for the stock catalogue

[Tony]

Hello Gray,
And who said that retirement was a time to relax ? That list will keep you busy for the next twelve months ! Have you ever looked at Art Mounting Board for modelling with ? It is available from any picture framing shop, especially offcuts which are ideal for modelling. It is 2mm thick and easy to cut.

[Madcaravanner]

Originally Posted by Tony

Hello Gray,
And who said that retirement was a time to relax ? That list will keep you busy for the next twelve months ! Have you ever looked at Art Mounting Board for modelling with ? It is available from any picture framing shop, especially offcuts which are ideal for modelling. It is 2mm thick and easy to cut.

I'm not retired just long term sickness


and yes I have looked at Art Mounting Board but the stuff I have found only cost £1 a sheet compared to over £3 for the board

Can only spend pennies most of the time so have to work hard to keep costs down

[Madcaravanner]

Originally Posted by Madcaravanner

OK not getting into the mancave much as SWMBO is insistent about me doing joinery at a 1-1 scale in the kitchen putting together the bits for her to put together a new kitchen

but when I get chance as well as doing more to the Wagon Works which is now getting the name - Jacksons Wagon Works
As the family of the Jacksons used to own Clay Cross Company and the Ashover Light Railway so I thought it would look good especially as the only PO wagons I have are Clay Cross Company ones

there are 100 OO gauge figures to paint up to look a little more realistic

I have completed a conversion of an LNER Bogie Bolster into a Crane runner to go with the 75T Hornby Breakdown train

Also my Station-masters house is progressing and now has a rambling rose and window boxes - I was hoping that there would be some children in that 100 figures I got from Ebay but alas no

and I have just acquired a proper Milk Tanker for the Branch line Milk train which is waiting for photographing for the stock catalogue

OK
Progress report

Kitchen finished

OO figures 100 all painted

Station masters house finished and station re modelling started

2nd 6 wheel milk tanker obtained from Rails 2nd hand shop (Aladdin's Cave)

there's also a new Bogie Bolster set up as a departmental for track relaying complete now with 6 sections of rusty trackwork

The Station was just a bare back ground - now has a decent town back-scene courtesy of wordsworthmodelrailway.co.uk/ they do free printouts and their back-scenes are great

I have three platforms one has the station buildings in low relief (A Metcalfe model split lengthways) there is an over-bridge made from 2 Airfix kits and at present I am doing buildings for the two other platforms but at 6cm wide they are too narrow for full buildings so are getting Platform Canopies - these are card models totally scratch built right down to the valancing around the edges but with modelling the 60's at least I can easily make them look scruffy unlike the plastic models.

Photo's attached show
station as was
Station with new background
Station canopy construction including cutting the valances 4mm long and 1mm wide then with a point cut into the 1mm paling of the valance


Now a question

using the standard diagrams which measurement do I use to place starter signals at platform ends ???
Is it the same one that specifies where the Platform Canopy single support goes which in OO /4mm works out as 25mm from the platform edging ??

[Tony]

It is all coming on a treat Gray. I made up the Metcalf station kit exactly the same as yours (although ten years ago). Being from Chesterfield, did you know that this kit was based on the standard Cheshire Lines Committee station design ?

[Madcaravanner]

Originally Posted by Tony

It is all coming on a treat Gray. I made up the Metcalf station kit exactly the same as yours (although ten years ago). Being from Chesterfield, did you know that this kit was based on the standard Cheshire Lines Committee station design ?

Yes was aware it was Cheshire Line Committee which really doesn't fit a GCR / MR base but it is a useful kit to use and the signal box at the end of the platform is a copy of the one at Folkestone Harbour

[Tony]

Hi Gray,
The Cheshire Lines Committee WAS the Great Central (with joint LMS operation) before they built the branch line to London !!!
Regards, Tony

[Madcaravanner]

Originally Posted by Tony

Hi Gray,
The Cheshire Lines Committee WAS the Great Central (with joint LMS operation) before they built the branch line to London !!!
Regards, Tony

DOH
Wasn't awake last night needed more tablets than I could take getting the same way tonight too hate this feeling

Never mind the workbench can wait for tonight

tomorrow going to make a background for a little display diorama I am building so ANOTHER station canopy but fixed on a flat building face should do it

[Tony]

Hi Gray,
I could do with whatever you are on, you seem to get through a great deal of work. I have one square foot of my "N" gauge layout to finish and havn't managed it during the past three months. I have all the bits and made the farm buildings but have to put up fencing and lay farmyard and grass. I wrote about starting the layout about 18 months ago under "A project for Winter", I didn't say which Winter though !
Regards, Tony