15:23

Welcome to Railway Forum!
Welcome!

Thank you for finding your way to Railway Forum, a dedicated community for railway and train enthusiasts. There's a variety of forums, a wonderful gallery, and what's more, we are absolutely FREE. You are very welcome to join, take part in the discussion, and post your pictures!

Click here to go to the forums home page and find out more.
Click here to join.


Go Back   Railway Forum > News and General Discussion > Railway News from around the World

Footplate ride on a 15thClass Garratt

Reply
 
Thread Tools
  #1  
Old 4th May 2010, 22:11
DSY011's Avatar
DSY011 DSY011 is offline  
Station Manager
 
Join Date: Nov 2005
Location: BRISTOL U.K.
Posts: 4,464
Images: 547
Footplate ride on a 15thClass Garratt

A bit of film of a footplate ride on a 15th class Garratt. I have fired this loco but have never driven it. I use to work this bit of line back in the 1960's. You will see the fireman using an Ajax steam fire door and. You will also see the slack hose being used to wet the coal and wash to floor, the fireman resting his arm on the injector lever. At the start of the film you see the driver pumping hard grease into the bearings.

http://www.youtube.com/watch?v=cfZCQOTJ_sE

Firemans view from a 15th Class at Kennedy siding
Attached Images
File Type: jpg 15A waiting for a 19D.jpg (146.7 KB, 4 views)


__________________
The Old Git, Syd
Reply With Quote
  #2  
Old 4th May 2010, 22:30
klordger1900's Avatar
klordger1900 klordger1900 is offline  
Senior Member
 
Join Date: Feb 2009
Location: chelmsford
Posts: 732
Images: 27
Thks for that Syd - I enjoyed that clip. Do those locos have dual regulators with a driver working each end of the loco simultaneously?
Reply With Quote
  #3  
Old 4th May 2010, 22:41
DSY011's Avatar
DSY011 DSY011 is offline  
Station Manager
 
Join Date: Nov 2005
Location: BRISTOL U.K.
Posts: 4,464
Images: 547
Hi klorger1900, the one regulator supplys steam to both the front and rear ends.
__________________
The Old Git, Syd
Reply With Quote
  #4  
Old 4th May 2010, 22:44
klordger1900's Avatar
klordger1900 klordger1900 is offline  
Senior Member
 
Join Date: Feb 2009
Location: chelmsford
Posts: 732
Images: 27
But I saw 2 drivers each tuggung at a regulator handle - is there normally a crew of 3 then?
Reply With Quote
  #5  
Old 4th May 2010, 23:24
DSY011's Avatar
DSY011 DSY011 is offline  
Station Manager
 
Join Date: Nov 2005
Location: BRISTOL U.K.
Posts: 4,464
Images: 547
No, There was the driver on the rights of the cab, the fireman on the left and the 'Garratt Boy' who was standing behind the fireman to begin with. His job is to keep the coal wet and to push coal forward for the fireman. The regulator has a long handle on the right and a short one on the left. It can be quite stiff at times and the driver will ask the fireman to assist in opening it at times. Also as was habit on the RR, if the fireman saw a signal at red, he would close the reg. and shout to the driver warning of a danger signal. The driver would hit the brakes, these trains took some stopping.
__________________
The Old Git, Syd
Reply With Quote
  #6  
Old 5th May 2010, 05:44
klordger1900's Avatar
klordger1900 klordger1900 is offline  
Senior Member
 
Join Date: Feb 2009
Location: chelmsford
Posts: 732
Images: 27
Thanks Syd - that train seemed to be travelling fairly quick, what is the top speed?
Reply With Quote
  #7  
Old 5th May 2010, 20:56
DSY011's Avatar
DSY011 DSY011 is offline  
Station Manager
 
Join Date: Nov 2005
Location: BRISTOL U.K.
Posts: 4,464
Images: 547
As it was a passenger Train (Mail Train in Zim) it could travel at up to 55mph. I have been on the footplate as a fireman running to Livingstone late when my driver Dicky McDonald took a 15th Class up to 75mph. Believe me it was very uncomfortable. You can see in the video how much the driver is bounced about.
__________________
The Old Git, Syd
Reply With Quote
  #8  
Old 5th May 2010, 23:39
klordger1900's Avatar
klordger1900 klordger1900 is offline  
Senior Member
 
Join Date: Feb 2009
Location: chelmsford
Posts: 732
Images: 27
Did this class of loco have a speedo or were you doing stop watch timing?
Reply With Quote
  #9  
Old 6th May 2010, 06:13
48111 48111 is offline  
Registered Member
 
Join Date: Jun 2009
Posts: 414
Very enjoyable piece of film.
48111
Reply With Quote
  #10  
Old 6th May 2010, 06:15
locojoe's Avatar
locojoe locojoe is offline  
Registered Member
 
Join Date: Oct 2006
Location: London England
Posts: 951
Images: 47
Garratt

Quote:
Originally Posted by DSY011 View Post
A bit of film of a footplate ride on a 15th class Garratt. I have fired this loco but have never driven it. I use to work this bit of line back in the 1960's. You will see the fireman using an Ajax steam fire door and. You will also see the slack hose being used to wet the coal and wash to floor, the fireman resting his arm on the injector lever. At the start of the film you see the driver pumping hard grease into the bearings. http://www.youtube.com/watch?v=cfZCQOTJ_sE

Hi Syd a good video showing a RHD Garratt. I noticed a hydrostatic lubricator on the drivers side did garratts not use mechanical lubricators. I like the large cab ideal for warmer climes and the Ajax steam fire door looks useful.

Photo of Garratt lubricator fitted inside cab.
Attached Images
File Type: jpg Garratt lubricator.jpg (81.5 KB, 7 views)
__________________
locojoe
When I read about the evils of drink I gave up reading
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 15:23.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.